Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Thimble collector's shelf
By Krypto
Complexity
Simple
Others Collections & display
0
Thimble collector's shelf
MAIN PURPOSE: Display a thimble collection on three tiny ledges
A wall shadow-box for thimble collectors, open at the front with two narrow ledges plus the floor. Thimbles stand in rows like tiny cups in a cabinet, safe from being knocked about.
Printing notes
98.1 cm³
Volume
121.6 g
Est. weight
1,508
Triangles

Hang through the keyholes; each ledge takes about six thimbles. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Ice-skate blade guard
By Krypto
Complexity
Simple (set)
Others Sport & fitness
0
Ice-skate blade guard
MAIN PURPOSE: Protect a skate blade when walking off the ice
A walking guard for figure or hockey skate blades: a narrow channel that slips over the blade between rink and locker room so the edge doesn't get nicked on concrete. Print one for each skate.
Printing notes
19.8 cm³
Volume
24.5 g
Est. weight
3,394
Triangles

Print two in TPU or PETG; scale the length to the blade. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Signal Quad
By Krypto
Complexity
Simple
Desk & office Desk organisation
0
Signal Quad
MAIN PURPOSE: Show whether you can be interrupted
A square pen cup with one word on each face: FOCUS, CALL, BREAK and OPEN. Turn it so the right word faces the room and colleagues or family can see at a glance whether to interrupt, with no light, app or door sign. The pens stay exactly where they always were.
Printing notes
19.0 cm³
Volume
23.6 g
Est. weight
10,668
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Cordflag
By Krypto
Complexity
Simple (set)
Desk & office Cables & charging
0
Cordflag
MAIN PURPOSE: Label cables right behind the plug
Snap the small ring onto a cable just behind the plug and the flag says what it powers: LAPTOP, ROUTER, LAMP. Under a desk or behind the TV you unplug the right lead first time. The 5 mm ring takes most USB and mains flex and rotates so the flag always faces you.
Printing notes
1.6 cm³
Volume
2.0 g
Est. weight
2,964
Triangles

PETG or TPU; print a set with different words. Prints flat as a plate, no supports.

AR view Open in app
Preview of Deckle Rule
By Krypto
Complexity
Simple
Desk & office Paper & bookbinding
0
Deckle Rule
MAIN PURPOSE: Tear paper with a handmade deckle edge
Hold the rule down on a sheet and tear the paper up against its rippled edge: you get the soft, irregular deckle of handmade paper on invitations, place cards, menus and journal pages, with no deckle box and no wet tearing. The other edge is a plain straight edge for normal tears.
Printing notes
41.7 cm³
Volume
51.7 g
Est. weight
6,764
Triangles

Print flat in PLA or PETG.

AR view Open in app
Preview of Puck Easel
By Krypto
Complexity
Simple
Desk & office Cables & charging
0
Puck Easel
MAIN PURPOSE: Turn a flat wireless charger into a stand
Drop a round wireless charging pad into the slot at the back and its face lines up with the 56 mm window: lean your phone against the front and it charges standing up, where you can still read the screen, instead of lying flat. The cable leaves through the back and the front lip stops the phone sliding.
Printing notes
17.6 cm³
Volume
21.8 g
Est. weight
452
Triangles

Print upright in PLA or PETG. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Stepover
By Krypto
Complexity
Simple
Desk & office Cables & charging
0
Stepover
MAIN PURPOSE: Cover a cable crossing the floor
A floor cable cover: lay it over a lead that has to cross a hallway or the gap from desk to wall, and the 12 x 9 mm channel underneath hides it while the shallow ramps stop feet, chair wheels and vacuum heads catching. Print as many 200 mm lengths as the run needs and butt them end to end.
Printing notes
116.9 cm³
Volume
144.9 g
Est. weight
272
Triangles

Print it lying on its flat underside, in PETG or TPU. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Loop Lock
By Krypto
Complexity
Simple
Desk & office Cables & charging
0
Loop Lock
MAIN PURPOSE: Shorten a cable that is too long
Shorten a charger or headphone cable that is too long without coiling it: fold a loop of the excess and press both strands into the two side slots, which run in opposite directions so the cable takes an S-turn and holds. No unplugging, no ties, and sliding it along sets the length.
Printing notes
5.4 cm³
Volume
6.7 g
Est. weight
1,524
Triangles

PETG or TPU, printed flat. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Nib Rest
By Krypto
Complexity
Simple
Desk & office Office tools
0
Nib Rest
MAIN PURPOSE: Rest an open fountain pen without rolling
A low rest for fountain pens and brushes: lay a pen across one of the two cradles and the nib stays off the desk and the barrel cannot roll, so an uncapped pen can wait between sentences. Small enough to sit beside the notebook all day.
Printing notes
16.8 cm³
Volume
20.8 g
Est. weight
432
Triangles

Print it lying on its side (the profile flat on the bed) in PETG.

AR view Open in app
Preview of Steep Cap
By Krypto
Complexity
Simple
Kitchen Coffee & tea
0
Steep Cap
MAIN PURPOSE: Cover a steeping mug, then rest the bag
Lay it upside down on a mug while the tea steeps, with the tag string through the notch: the tea stays hot and the bag cannot sink out of reach. When it is ready, lift it off, turn it over and it becomes the saucer for the wet tea bag and the spoon.
Printing notes
18.7 cm³
Volume
23.2 g
Est. weight
1,736
Triangles

Food-safe PETG. Print floor-down as shown, then turn it over to use it.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan