Protect a skate blade when walking off the ice
A walking guard for figure or hockey skate blades: a narrow channel that slips over the blade between rink and locker room so the edge doesn't get nicked on concrete. Print one for each skate.
Print two in TPU or PETG; scale the length to the blade.
Prints as shown on its floor, no supports.
Filament: at most about 24.5 g of PLA printed solid (roughly $0.49 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The ice-skate blade guard model measures 290 × 16 × 24 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Print two in TPU or PETG; scale the length to the blade. Prints as shown on its floor, no supports.
At most about 24.5 g of PLA (19.8 cm³ printed solid), roughly $0.49 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the ice-skate blade guard model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.