Fight-night drying pod — 3D-printable model preview

AR view

Sport & fitness Multi-part assembly

Fight-night drying pod

Let a mouthguard and hand wraps air-dry in a gym bag

A ventilated pod for combat sports. A mouthguard sits in the small side and rolled hand wraps in the big side, and the honeycomb walls let them dry out instead of going sour in a sealed box. The ring-pull lid is easy to open with taped hands.

Customize this model

Size: 170 × 96 × 76 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 201 cm³
Est. weight (PLA): 249 g
Parts to print: 2
Category: Sport & fitness
Made by: Krypto
Built in: 23 steps

What’s in it

Rectangular, 170 × 96 × 76 mm, with 2.4 mm walls
1 divider
1 patterned wall panel (cut-out)
Lift-off lid (prints separately)

How to print it

PETG; wash in warm soapy water, not the dishwasher.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 249 g of PLA printed solid (roughly $4.98 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the fight-night drying pod model?

The fight-night drying pod model measures 170 × 96 × 76 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG; wash in warm soapy water, not the dishwasher. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 249 g of PLA (201 cm³ printed solid), roughly $4.98 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More sport & fitness

Skateboard bearing press with depth flange

Press skate bearings into wheels squarely

Medium

Forearm wrist roller tube

Train forearms and grip with a rolled weight

Medium

Ab roller wheel for a broom handle

Make an ab roller from a wheel and a dowel

Medium

Skipping rope handles

Make a skipping rope

Simple (set)

Vented swim goggle case

Carry swim goggles so the lenses never get scratched and dry out

Multi-part assembly

Massage gun dock

Stand a massage gun upright next to its six heads

Advanced

Pickleball paddle and ball wall dock

Hang two pickleball paddles and balls by the door

Advanced

Badminton shuttle tube

Keep shuttlecocks from being crushed in a racket bag

Multi-part assembly

See all 28 in Sport & fitness

Make it fit your space

Change the size, walls, dividers, holes and labels of the fight-night drying pod model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model