Pickleball paddle and ball wall dock — 3D-printable model preview

AR view

Sport & fitness Advanced

Pickleball paddle and ball wall dock

Hang two pickleball paddles and balls by the door

A wall dock for pickleball players: two paddles drop head-first into the slotted centre, and a cup on each side holds a ball. The perforated floor lets grit and rain fall through, and two keyholes on the back hang it on screws.

Customize this model

Size (Base A): 222 × 56 × 80 mm
Shape: Rectangular
Walls: 2.6 mm
Volume: 141 cm³
Est. weight (PLA): 175 g
Parts to print: 1
Category: Sport & fitness
Made by: Krypto
Built in: 39 steps

What’s in it

Rectangular, 222 × 56 × 80 mm, with 2.6 mm walls
1 divider
Raised text: “PICKLEBALL”
1 patterned wall panel (cut-out)
2 more bases built on (Bases B–C)
Base B: round, Ø 82 mm, 40 mm tall (beside)
Base C: round, Ø 82 mm, 40 mm tall (beside)

How to print it

Screw to the wall through the two keyholes; PETG for a garage.

Prints as shown on its floor, no supports.

Filament: at most about 175 g of PLA printed solid (roughly $3.50 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pickleball paddle and ball wall dock model?

The pickleball paddle and ball wall dock model measures 222 × 56 × 80 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Screw to the wall through the two keyholes; PETG for a garage. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 175 g of PLA (141 cm³ printed solid), roughly $3.50 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More sport & fitness

Skateboard bearing press with depth flange

Press skate bearings into wheels squarely

Medium

Forearm wrist roller tube

Train forearms and grip with a rolled weight

Medium

Ab roller wheel for a broom handle

Make an ab roller from a wheel and a dowel

Medium

Skipping rope handles

Make a skipping rope

Simple (set)

Massage gun dock

Stand a massage gun upright next to its six heads

Advanced

Vented swim goggle case

Carry swim goggles so the lenses never get scratched and dry out

Multi-part assembly

Ball pump and needle keeper

Keep a ball pump and its inflation needles together

Multi-part assembly

Fight-night drying pod

Let a mouthguard and hand wraps air-dry in a gym bag

Multi-part assembly

See all 28 in Sport & fitness

Make it fit your space

Change the size, walls, dividers, holes and labels of the pickleball paddle and ball wall dock model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model