Puck Easel

Turn a flat wireless charger into a stand

Drop a round wireless charging pad into the slot at the back and its face lines up with the 56 mm window: lean your phone against the front and it charges standing up, where you can still read the screen, instead of lying flat. The cable leaves through the back and the front lip stops the phone sliding.

Customize this model

Size: 112 × 64 × 130 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 17.6 cm³
Est. weight (PLA): 21.8 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 22 steps

What’s in it

Rectangular, 112 × 64 × 130 mm, with 2.4 mm walls
1 divider
2 holes in the walls

How to print it

Print upright in PLA or PETG.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 21.8 g of PLA printed solid (roughly $0.44 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the puck Easel model?

The puck Easel model measures 112 × 64 × 130 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Print upright in PLA or PETG. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 21.8 g of PLA (17.6 cm³ printed solid), roughly $0.44 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.