Route cables along a monitor arm
Snap the big C onto a 30 mm monitor arm and the cables into the small one: the cables follow the arm wherever you swing the screen instead of hanging in a loop behind it.
Print three or four in PETG.
Prints as shown on its outline, no supports.
Filament: at most about 4.9 g of PLA printed solid (roughly $0.10 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The monitor arm cable clip model measures 36 × 46 × 12 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Print three or four in PETG. Prints as shown on its outline, no supports.
At most about 4.9 g of PLA (4.0 cm³ printed solid), roughly $0.10 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the monitor arm cable clip model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.