Fix a network cable with a snapped latch
Slide the clip sideways over the body of a network plug whose latch has snapped off: its own springy tongue catches in the socket again, so the cable stays plugged in without crimping a new connector.
Print in PETG; print a few.
Prints as shown on its outline, no supports.
Filament: at most about 1.6 g of PLA printed solid (roughly $0.03 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The RJ45 broken-latch repair clip model measures 20 × 18 × 11 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Print in PETG; print a few. Prints as shown on its outline, no supports.
At most about 1.6 g of PLA (1.3 cm³ printed solid), roughly $0.03 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the RJ45 broken-latch repair clip model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.