Stop charging cables sliding off the desk
Snap the charging cables into the three keyhole slots and fill the block with coins: when you unplug the phone, the cable ends stay on the desk instead of sliding off the back and down behind it.
Glue felt or rubber underneath.
Prints as shown on its outline, no supports.
Filament: at most about 27.5 g of PLA printed solid (roughly $0.55 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The weighted cable-end anchor model measures 70 × 34 × 22 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Glue felt or rubber underneath. Prints as shown on its outline, no supports.
At most about 27.5 g of PLA (22.2 cm³ printed solid), roughly $0.55 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the weighted cable-end anchor model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.