Loop Lock

Shorten a cable that is too long

Shorten a charger or headphone cable that is too long without coiling it: fold a loop of the excess and press both strands into the two side slots, which run in opposite directions so the cable takes an S-turn and holds. No unplugging, no ties, and sliding it along sets the length.

Customize this model

Size: 40 × 16 × 14 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 5.4 cm³
Est. weight (PLA): 6.7 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 40 × 16 × 14 mm, with 3.0 mm walls
Custom outline traced from a shape

How to print it

PETG or TPU, printed flat.

Prints as shown on its outline, no supports.

Filament: at most about 6.7 g of PLA printed solid (roughly $0.13 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the loop Lock model?

The loop Lock model measures 40 × 16 × 14 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG or TPU, printed flat. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 6.7 g of PLA (5.4 cm³ printed solid), roughly $0.13 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.