Cordflag

Label cables right behind the plug

Snap the small ring onto a cable just behind the plug and the flag says what it powers: LAPTOP, ROUTER, LAMP. Under a desk or behind the TV you unplug the right lead first time. The 5 mm ring takes most USB and mains flex and rotates so the flag always faces you.

Customize this model

Size: 54 × 16 × 7 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 1.6 cm³
Est. weight (PLA): 2.0 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 10 steps

What’s in it

Custom outline, 54 × 16 × 7 mm, with 2.4 mm walls
Custom outline traced from a shape
Engraved text: “LAPTOP”

How to print it

PETG or TPU; print a set with different words.

Prints flat as a plate, no supports.

Filament: at most about 2.0 g of PLA printed solid (roughly $0.04 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the cordflag model?

The cordflag model measures 54 × 16 × 7 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG or TPU; print a set with different words. Prints flat as a plate, no supports.

How much filament does it use?

At most about 2.0 g of PLA (1.6 cm³ printed solid), roughly $0.04 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.