Stepover

Cover a cable crossing the floor

A floor cable cover: lay it over a lead that has to cross a hallway or the gap from desk to wall, and the 12 x 9 mm channel underneath hides it while the shallow ramps stop feet, chair wheels and vacuum heads catching. Print as many 200 mm lengths as the run needs and butt them end to end.

Customize this model

Size: 78 × 13 × 200 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 117 cm³
Est. weight (PLA): 145 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 78 × 13 × 200 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print it lying on its flat underside, in PETG or TPU.

Prints as shown on its outline, no supports.

Filament: at most about 145 g of PLA printed solid (roughly $2.90 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the stepover model?

The stepover model measures 78 × 13 × 200 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print it lying on its flat underside, in PETG or TPU. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 145 g of PLA (117 cm³ printed solid), roughly $2.90 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.