Signal Quad

Show whether you can be interrupted

A square pen cup with one word on each face: FOCUS, CALL, BREAK and OPEN. Turn it so the right word faces the room and colleagues or family can see at a glance whether to interrupt, with no light, app or door sign. The pens stay exactly where they always were.

Customize this model

Size: 72 × 72 × 100 mm
Shape: Square
Walls: 3.0 mm
Volume: 19.0 cm³
Est. weight (PLA): 23.6 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 32 steps

What’s in it

Square, 72 × 72 × 100 mm, with 3.0 mm walls
Engraved text: “FOCUS”, “CALL”, “BREAK”, “OPEN”

How to print it

Prints as shown on its floor, no supports.

Filament: at most about 23.6 g of PLA printed solid (roughly $0.47 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the signal Quad model?

The signal Quad model measures 72 × 72 × 100 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 23.6 g of PLA (19.0 cm³ printed solid), roughly $0.47 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.