Pivot Drawer

Add a swing-out drawer under any desk

A pencil tray that screws under the desk top through its corner post and swings out on that single screw: push it back and it disappears under the edge, pull the finger notch and pens, cables and the stapler swing out to you. The post is 2 mm taller than the walls so the rim never rubs the desk.

Customize this model

Size (Base A): 220 × 120 × 34 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 72.1 cm³
Est. weight (PLA): 89.5 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 30 steps

What’s in it

Rectangular, 220 × 120 × 34 mm, with 2.4 mm walls
1 hole in the floor
One more base built on (Base B)
Base B: round, Ø 26 mm, 36 mm tall (beside)

How to print it

Print in PETG; one 4.5 mm wood screw and a washer.

Prints as shown on its floor, no supports.

Filament: at most about 89.5 g of PLA printed solid (roughly $1.79 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pivot Drawer model?

The pivot Drawer model measures 220 × 120 × 34 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in PETG; one 4.5 mm wood screw and a washer. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 89.5 g of PLA (72.1 cm³ printed solid), roughly $1.79 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.