Rolled-drawing corner weights — 3D-printable model preview

AR view

Desk organisation Multi-part assembly

Rolled-drawing corner weights

Hold rolled drawings flat on the desk

Fill each triangle with 100 g of coins or steel shot, glue the lid and set one on each corner of a rolled drawing, map or poster: the right angle sits snugly on the corner and the sheet stays flat for reading or tracing.

Customize this model

Size: 70 × 70 × 20 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 36.3 cm³
Est. weight (PLA): 45.0 g
Parts to print: 2
Category: Desk organisation
Made by: Krypto
Built in: 8 steps

What’s in it

Custom outline, 70 × 70 × 20 mm, with 2.4 mm walls
Custom outline traced from a shape
Telescoping lid (prints separately)

How to print it

Print four; glue felt underneath.

Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

Filament: at most about 45.0 g of PLA printed solid (roughly $0.90 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the rolled-drawing corner weights model?

The rolled-drawing corner weights model measures 70 × 70 × 20 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print four; glue felt underneath. Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 45.0 g of PLA (36.3 cm³ printed solid), roughly $0.90 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More desk organisation

Desk mug lid with spoon slot

Keep a desk drink warm and covered

Simple

Desk-back gap shelf

Stop things falling down behind the desk

Simple (set)

Desk-edge hook for bag or headset

Hang a bag or headset at a desk

Simple

Desk-edge cup holder

Keep drinks off a busy desk

Simple

Monitor-side phone holster

Keep notifications in view beside the screen

Simple

Desk-edge forearm guard

Soften a sharp desk edge under the forearms

Simple (set)

Laptop keyboard bridge

Use an external keyboard over a laptop

Simple

Split keyboard tenting wedges

Tilt split keyboard halves for neutral wrists

Simple (set)

See all 155 in Desk organisation

Make it fit your space

Change the size, walls, dividers, holes and labels of the rolled-drawing corner weights model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model