Steep Cap

Cover a steeping mug, then rest the bag

Lay it upside down on a mug while the tea steeps, with the tag string through the notch: the tea stays hot and the bag cannot sink out of reach. When it is ready, lift it off, turn it over and it becomes the saucer for the wet tea bag and the spoon.

Customize this model

Size: 96 × 96 × 12 mm
Shape: Square
Walls: 2.0 mm
Volume: 18.7 cm³
Est. weight (PLA): 23.2 g
Parts to print: 1
Category: Coffee & tea
Made by: Krypto
Built in: 19 steps

What’s in it

Square, 96 × 96 × 12 mm, with 2.0 mm walls

How to print it

Food-safe PETG.

Print floor-down as shown, then turn it over to use it.

Filament: at most about 23.2 g of PLA printed solid (roughly $0.46 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the steep Cap model?

The steep Cap model measures 96 × 96 × 12 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Food-safe PETG. Print floor-down as shown, then turn it over to use it.

How much filament does it use?

At most about 23.2 g of PLA (18.7 cm³ printed solid), roughly $0.46 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.