Measure loose-leaf tea by the cup
Three wells sized for one, two and four cups (5, 10 and 20 ml): dip, level with a finger and tip into the pot, so loose-leaf tea comes out the same strength every time without a set of spoons.
Food-safe PETG.
Prints as shown on its floor, no supports.
Filament: at most about 15.7 g of PLA printed solid (roughly $0.31 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The loose-leaf tea portion scoop model measures 86 × 32 × 18 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Food-safe PETG. Prints as shown on its floor, no supports.
At most about 15.7 g of PLA (12.7 cm³ printed solid), roughly $0.31 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the loose-leaf tea portion scoop model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.