Pagoda Stack

Store teas in storeys whose eaves are lids

Stacking tea caddies built on pagoda logic: every storey wears a wide octagonal eave, and the eave of the storey above is the lid of the one below. Stack three, four or five, one tea in each, and lift off the upper storeys to reach the one you want.

Customize this model

Size (Base A): 116 × 116 × 8 mm
Shape: Octagonal
Walls: 3.0 mm
Volume: 55.3 cm³
Est. weight (PLA): 68.6 g
Parts to print: 1
Category: Coffee & tea
Made by: Krypto
Built in: 14 steps

What’s in it

Octagonal, 116 × 116 × 8 mm, with 3.0 mm walls
One more base built on (Base B)
Base B: octagonal, 72 × 72 mm, 42 mm tall (stacked)

How to print it

Print as many storeys as teas; add a fifth eave as the top cap.

Prints flat as a plate, no supports. Stacked parts are fused into one print.

Filament: at most about 68.6 g of PLA printed solid (roughly $1.37 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pagoda Stack model?

The pagoda Stack model measures 116 × 116 × 8 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print as many storeys as teas; add a fifth eave as the top cap. Prints flat as a plate, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 68.6 g of PLA (55.3 cm³ printed solid), roughly $1.37 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.