Cold Hang

Hang a cold brew bag in a jar

Rest the bridge on the mouth of a wide jar and hang a cold brew coffee or tea filter bag from the bar by its drawstring: the bag stays submerged without sinking to the bottom or flopping against the glass, and next morning you lift bridge and bag out together to drip over the sink.

Customize this model

Size: Ø 92 mm, 16 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 24.5 cm³
Est. weight (PLA): 30.4 g
Parts to print: 1
Category: Coffee & tea
Made by: Krypto
Built in: 12 steps

What’s in it

Round, Ø 92 mm, 16 mm tall, with 2.4 mm walls
Radial dividers making 2 wedge-shaped sections
1 hole in the floor

How to print it

Food-safe PETG.

Prints as shown on its floor, no supports.

Filament: at most about 30.4 g of PLA printed solid (roughly $0.61 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the cold Hang model?

The cold Hang model measures Ø 92 mm, 16 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Food-safe PETG. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 30.4 g of PLA (24.5 cm³ printed solid), roughly $0.61 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.