Deckle Rule

Tear paper with a handmade deckle edge

Hold the rule down on a sheet and tear the paper up against its rippled edge: you get the soft, irregular deckle of handmade paper on invitations, place cards, menus and journal pages, with no deckle box and no wet tearing. The other edge is a plain straight edge for normal tears.

Customize this model

Size: 260 × 42 × 9 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 41.7 cm³
Est. weight (PLA): 51.7 g
Parts to print: 1
Category: Paper & bookbinding
Made by: Krypto
Built in: 10 steps

What’s in it

Custom outline, 260 × 42 × 9 mm, with 4.0 mm walls
Custom outline traced from a shape
Engraved text: “TEAR UPWARDS”

How to print it

Print flat in PLA or PETG.

Filament: at most about 51.7 g of PLA printed solid (roughly $1.03 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the deckle Rule model?

The deckle Rule model measures 260 × 42 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat in PLA or PETG.

How much filament does it use?

At most about 51.7 g of PLA (41.7 cm³ printed solid), roughly $1.03 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.