Book corner mailing protectors — 3D-printable model preview

AR view

Paper & bookbinding Medium (set)

Book corner mailing protectors

Protect book corners in the post

Slide a protector onto each corner of a hardback before you wrap it for the post: the corner sits in a sleeve that covers both boards and both edges, so books stop arriving with crushed corners. Fits books up to 28 mm thick. Print four.

Customize this model

Size (Base A): 50 × 50 × 30 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 15.7 cm³
Est. weight (PLA): 19.5 g
Parts to print: 1
Category: Paper & bookbinding
Made by: Krypto
Built in: 12 steps

What’s in it

Rectangular, 50 × 50 × 30 mm, with 2.0 mm walls
One more base built on (Base B)
Base B: rectangular, 50 × 50 mm (stacked)

How to print it

Print four.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 19.5 g of PLA printed solid (roughly $0.39 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the book corner mailing protectors model?

The book corner mailing protectors model measures 50 × 50 × 30 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print four. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 19.5 g of PLA (15.7 cm³ printed solid), roughly $0.39 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More paper & bookbinding

Book scanning cradle ends

Hold an open book for scanning without strain

Simple (set)

Line-pointer page clip

Mark the exact line where you stopped reading

Simple (set)

Envelope addressing guide

Write straight addresses on envelopes

Medium

Bookbinding punching cradle

Punch sewing holes in book signatures

Simple

Notepad padding press

Make glued notepads from scrap paper

Simple

A-series card scoring board

Score A-size cards to fold exactly in half

Medium

Notebook pen loop clip

Keep a pen attached to a notebook

Simple

Bone folder

Fold and crease paper and card

Simple

See all 26 in Paper & bookbinding

Make it fit your space

Change the size, walls, dividers, holes and labels of the book corner mailing protectors model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model