Station Fence — 3D-printable model preview

AR view

Paper & bookbinding Medium

Station Fence

Pierce sewing stations for bookbinding

Lay the strip in the fold of an open signature with the back lip hooked over the head of the pages, then push an awl through the seven guide holes. Every signature in the book gets its sewing stations in exactly the same place, so the spine comes out straight. Stations are 40 mm apart.

Customize this model

Size: 280 × 26 × 10 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 22.5 cm³
Est. weight (PLA): 27.9 g
Parts to print: 1
Category: Paper & bookbinding
Made by: Krypto
Built in: 53 steps

What’s in it

Rectangular, 280 × 26 × 10 mm, with 2.4 mm walls
7 holes in the floor
Engraved text: “HEAD”

How to print it

Print flat in PLA.

Prints as shown on its floor, no supports.

Filament: at most about 27.9 g of PLA printed solid (roughly $0.56 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the station Fence model?

The station Fence model measures 280 × 26 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print flat in PLA. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 27.9 g of PLA (22.5 cm³ printed solid), roughly $0.56 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More paper & bookbinding

Line-pointer page clip

Mark the exact line where you stopped reading

Simple (set)

Book scanning cradle ends

Hold an open book for scanning without strain

Simple (set)

Book corner mailing protectors

Protect book corners in the post

Medium (set)

Envelope addressing guide

Write straight addresses on envelopes

Medium

Bookbinding punching cradle

Punch sewing holes in book signatures

Simple

Deckle Rule

Tear paper with a handmade deckle edge

Simple

Glue Bridge

Keep PVA glue and wipe the brush

Multi-part assembly

Origami paper station

Keep 150 and 75 mm origami paper flat with a bone folder at hand

Advanced

See all 26 in Paper & bookbinding

Make it fit your space

Change the size, walls, dividers, holes and labels of the station Fence model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model