Glue Bridge

Keep PVA glue and wipe the brush

A PVA pot for bookbinding and paper crafts: the bar across the top is for wiping excess glue off the brush, so it goes on thin and even, and the snug lid keeps the glue workable between sessions. Fill to just below the bar.

Customize this model

Size: 80 × 80 × 70 mm
Shape: Square
Walls: 2.4 mm
Volume: 49.1 cm³
Est. weight (PLA): 60.9 g
Parts to print: 2
Category: Paper & bookbinding
Made by: Krypto
Built in: 26 steps

What’s in it

Square, 80 × 80 × 70 mm, with 2.4 mm walls
1 divider
Telescoping lid (prints separately)

How to print it

PETG; PVA peels off it when dry.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 60.9 g of PLA printed solid (roughly $1.22 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the glue Bridge model?

The glue Bridge model measures 80 × 80 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG; PVA peels off it when dry. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 60.9 g of PLA (49.1 cm³ printed solid), roughly $1.22 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.