Showcase
Models Showcase
Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category
MAIN PURPOSE: Guide desk cables through a lake monster's humps
A loch monster that keeps your cables in line. Its head and neck rise from a 9 mm waterline at one end, three humps arch along the desk and a tail flicks up at the other; thread charging cables through the humps and they stay put. Folklore, cable management and a smile in one 222 mm piece.
Printing notes
69.0 cm³
Volume
85.6 g
Est. weight
1,884
Triangles
Print lying flat in dark green; all strokes come out solid.
MAIN PURPOSE: Rest rings and a pendant in a lamp-shaped dish
A ring dish in the plan of a storyteller's oil lamp. Rings, studs and a watch rest in the oval body, a necklace pendant lies along the tapering spout and the curled handle sticks out at the back like the real thing. Engraved underneath: rub gently.
Printing notes
24.5 cm³
Volume
30.4 g
Est. weight
5,608
Triangles
Print in gold, bronze or silk PLA. Prints as shown on its outline, no supports.
MAIN PURPOSE: Detangle hair with a fin-handled comb
A wide-tooth comb crowned with a sea siren's tail. The twin-lobed fin is the grip, the 100 mm spine carries 20 round-tipped teeth with generous gaps for detangling, and the whole comb is one 4 mm print. Beautiful enough to leave out by the mirror.
Printing notes
18.2 cm³
Volume
22.6 g
Est. weight
812
Triangles
Print flat in PETG; teeth along the bed lines.
MAIN PURPOSE: Share a split keyring that locks into a disc
Two halves of one tide. A 46 mm disc is split by a wave, and both halves are the same shape turned round, so you print two, engrave a name on each and give one away. Clip them to two keyrings; when you meet, the waves lock back into a full circle.
Printing notes
3.3 cm³
Volume
4.0 g
Est. weight
1,576
Triangles
Print two in contrasting colours with different names. Prints flat as a plate, no supports.
MAIN PURPOSE: Display a spoken phrase as a waveform sculpture
The shape of a spoken phrase, made solid. Twenty-five rounded bars rise and fall like a voice saying I love you on a 186 mm baseline, and the baseline face is engraved with the words and the occasion. Stand it on a shelf as a quiet sculpture with a meaning only you know.
Printing notes
78.9 cm³
Volume
97.8 g
Est. weight
9,460
Triangles
Print lying flat; stand it on the baseline.
MAIN PURPOSE: Calm a restless thumb with a pocket stone
A pocket worry stone with a thumb-shaped hollow. The 46 mm egg outline sits in the palm, its soft 5 mm rim frames a shallow dish exactly where the thumb falls, and the underside carries one engraved word. Rub it on the train, in a meeting or before a hard call.
Printing notes
9.3 cm³
Volume
11.6 g
Est. weight
2,596
Triangles
Print in silk or marble PLA at 100 % infill so it has weight. Prints as shown on its floor, no supports.
MAIN PURPOSE: Hold a bun with a crescent-headed hair fork
A two-prong hair fork with a crescent moon for a head. Twist up a bun, push the 112 mm tapered prongs through and the moon sits on top like a hair ornament; it holds better than a single stick and needs no elastic.
Printing notes
9.7 cm³
Volume
12.0 g
Est. weight
380
Triangles
Print flat in PETG or silk PLA; sand the tips smooth.
MAIN PURPOSE: Display a painted miniature on a broken-ground base
A display base for a painted miniature, shaped like a slab of ground broken off a battlefield. Fill the 58 mm faceted shell with cork, sand and tufts, set the figure on top, and the front facet carries its name. A magnet in the floor holds it on a steel shelf.
Printing notes
7.5 cm³
Volume
9.3 g
Est. weight
6,476
Triangles
Print in black; fill with cork or putty. 6 x 2 mm magnet. Prints as shown on its outline, no supports.
MAIN PURPOSE: Stand a finished embroidery hoop on a shelf
A stand that shows off finished embroidery in its hoop. The 80 mm foot stays flat on a shelf while two jaws grip the bottom of the hoop rim in a 12 mm slot, so a 10 to 25 cm hoop stands upright like a framed picture. Print one per hoop and change the display with the seasons.
Printing notes
48.2 cm³
Volume
59.7 g
Est. weight
984
Triangles
Print lying on its profile; all parts come out solid. Prints as shown on its outline, no supports.
MAIN PURPOSE: Protect poker hole cards with a personal guard
A card guard for poker night: the weighted token you set on your hole cards so the dealer never mucks them. The 40 mm guard has a hollow underside for a 2p coin or a washer and your initials engraved in the face. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
3.9 cm³
Volume
4.8 g
Est. weight
1,872
Triangles
Print open side up, glue in a coin, then flip. Print floor-down as shown, then turn it over to use it.