Lochling

Guide desk cables through a lake monster's humps

A loch monster that keeps your cables in line. Its head and neck rise from a 9 mm waterline at one end, three humps arch along the desk and a tail flicks up at the other; thread charging cables through the humps and they stay put. Folklore, cable management and a smile in one 222 mm piece.

Customize this model

Size: 222 × 82 × 16 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 69.0 cm³
Est. weight (PLA): 85.6 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 222 × 82 × 16 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print lying flat in dark green; all strokes come out solid.

Filament: at most about 85.6 g of PLA printed solid (roughly $1.71 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the lochling model?

The lochling model measures 222 × 82 × 16 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print lying flat in dark green; all strokes come out solid.

How much filament does it use?

At most about 85.6 g of PLA (69.0 cm³ printed solid), roughly $1.71 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.