Aqueduct Rail — 3D-printable model preview

AR view

Cables & charging Medium

Aqueduct Rail

Carry pens on top and route cables through arches

A desk rail built like a Roman aqueduct. Pens and pencils ride in the channel on top, while three arches run right through the piers so charging cables pass underneath and stay put, and a phone charger or power brick hides inside the hollow piers between the arches.

Customize this model

Size (Base A): 240 × 46 × 58 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 54.7 cm³
Est. weight (PLA): 67.9 g
Parts to print: 1
Category: Cables & charging
Made by: Krypto
Built in: 61 steps

What’s in it

Rectangular, 240 × 46 × 58 mm, with 2.4 mm walls
6 holes in the walls
One more base built on (Base B)
Base B: rectangular, 240 × 46 mm, 20 mm tall (stacked)

How to print it

Arches print bridged; no supports at 0.2 mm layers.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

Filament: at most about 67.9 g of PLA printed solid (roughly $1.36 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the aqueduct Rail model?

The aqueduct Rail model measures 240 × 46 × 58 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Arches print bridged; no supports at 0.2 mm layers. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

How much filament does it use?

At most about 67.9 g of PLA (54.7 cm³ printed solid), roughly $1.36 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More cables & charging

Weighted cable-end anchor

Stop charging cables sliding off the desk

Simple

RJ45 broken-latch repair clip

Fix a network cable with a snapped latch

Simple (set)

Standing desk cable spine links

Guide cables up a standing desk

Medium

Monitor arm cable clip

Route cables along a monitor arm

Simple (set)

Laptop one-push port block

Dock a laptop with one push

Multi-part assembly

Night Cell

Put the phone to bed charging out of sight

Medium

Lochling

Guide desk cables through a lake monster's humps

Simple

Loop Lock

Shorten a cable that is too long

Simple

See all 44 in Cables & charging

Make it fit your space

Change the size, walls, dividers, holes and labels of the aqueduct Rail model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model