Ante Guard

Protect poker hole cards with a personal guard

A card guard for poker night: the weighted token you set on your hole cards so the dealer never mucks them. The 40 mm guard has a hollow underside for a 2p coin or a washer and your initials engraved in the face. Print it as shown, then turn it over so the floor becomes the top.

Customize this model

Size: Ø 40 mm, 8 mm tall
Shape: Round
Walls: 2.0 mm
Volume: 3.9 cm³
Est. weight (PLA): 4.8 g
Parts to print: 1
Category: Tabletop gaming & play
Made by: Krypto
Built in: 10 steps

What’s in it

Round, Ø 40 mm, 8 mm tall, with 2.0 mm walls
Engraved text: “JR”

How to print it

Print open side up, glue in a coin, then flip.

Print floor-down as shown, then turn it over to use it.

Filament: at most about 4.8 g of PLA printed solid (roughly $0.10 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the ante Guard model?

The ante Guard model measures Ø 40 mm, 8 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print open side up, glue in a coin, then flip. Print floor-down as shown, then turn it over to use it.

How much filament does it use?

At most about 4.8 g of PLA (3.9 cm³ printed solid), roughly $0.10 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.