Critstand

Honour a legendary dice roll on a pedestal

A pedestal for the die that rolled the critical hit. The die sits in an octagonal cup on top, and the four faces record what happened: the roll, the date, the hero and the session. Retire a lucky die here, or award the plinth to the player who saved the party.

Customize this model

Size (Base A): 44 × 44 × 34 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 11.2 cm³
Est. weight (PLA): 13.8 g
Parts to print: 1
Category: Tabletop gaming & play
Made by: Krypto
Built in: 43 steps

What’s in it

Rectangular, 44 × 44 × 34 mm, with 2.4 mm walls
Engraved and raised text: “NAT 20”, “03.11.2026”, “GORVIN THE BOLD”, “SESSION 41”
2 more bases built on (Bases B–C)
Base B: rectangular, 44 × 44 mm (stacked)
Base C: octagonal, 30 × 30 mm, 6 mm tall (stacked)

How to print it

Print in black with gold text paint.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 13.8 g of PLA printed solid (roughly $0.28 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the critstand model?

The critstand model measures 44 × 44 × 34 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in black with gold text paint. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 13.8 g of PLA (11.2 cm³ printed solid), roughly $0.28 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.