Groundbreak

Display a painted miniature on a broken-ground base

A display base for a painted miniature, shaped like a slab of ground broken off a battlefield. Fill the 58 mm faceted shell with cork, sand and tufts, set the figure on top, and the front facet carries its name. A magnet in the floor holds it on a steel shelf.

Customize this model

Size: 58 × 58 × 16 mm
Shape: Custom outline
Walls: 2.0 mm
Volume: 7.5 cm³
Est. weight (PLA): 9.3 g
Parts to print: 1
Category: Tabletop gaming & play
Made by: Krypto
Built in: 10 steps

What’s in it

Custom outline, 58 × 58 × 16 mm, with 2.0 mm walls
Custom outline traced from a shape
1 hole in the floor
Engraved text: “SER CALLOW”

How to print it

Print in black; fill with cork or putty. 6 x 2 mm magnet.

Prints as shown on its outline, no supports.

Filament: at most about 9.3 g of PLA printed solid (roughly $0.19 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the groundbreak model?

The groundbreak model measures 58 × 58 × 16 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in black; fill with cork or putty. 6 x 2 mm magnet. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 9.3 g of PLA (7.5 cm³ printed solid), roughly $0.19 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.