Hoop Cradle

Stand a finished embroidery hoop on a shelf

A stand that shows off finished embroidery in its hoop. The 80 mm foot stays flat on a shelf while two jaws grip the bottom of the hoop rim in a 12 mm slot, so a 10 to 25 cm hoop stands upright like a framed picture. Print one per hoop and change the display with the seasons.

Customize this model

Size: 80 × 42 × 40 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 48.2 cm³
Est. weight (PLA): 59.7 g
Parts to print: 1
Category: Crafts & making
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 80 × 42 × 40 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print lying on its profile; all parts come out solid.

Prints as shown on its outline, no supports.

Filament: at most about 59.7 g of PLA printed solid (roughly $1.19 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the hoop Cradle model?

The hoop Cradle model measures 80 × 42 × 40 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print lying on its profile; all parts come out solid. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 59.7 g of PLA (48.2 cm³ printed solid), roughly $1.19 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.