Make yarn pom-poms
Print two of these C-rings and hold them together: wind yarn round and round, cut along the outer edge between the rings, tie the middle tightly and slide the rings off for a full, round pom-pom.
Print two.
Prints flat as a plate, no supports.
Filament: at most about 14.5 g of PLA printed solid (roughly $0.29 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The pom-pom maker model measures 70 × 69 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Print two. Prints flat as a plate, no supports.
At most about 14.5 g of PLA (11.7 cm³ printed solid), roughly $0.29 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the pom-pom maker model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.