Siren Fin

Detangle hair with a fin-handled comb

A wide-tooth comb crowned with a sea siren's tail. The twin-lobed fin is the grip, the 100 mm spine carries 20 round-tipped teeth with generous gaps for detangling, and the whole comb is one 4 mm print. Beautiful enough to leave out by the mirror.

Customize this model

Size: 100 × 89 × 9 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 18.2 cm³
Est. weight (PLA): 22.6 g
Parts to print: 1
Category: Jewellery & grooming
Made by: Krypto
Built in: 5 steps

What’s in it

Custom outline, 100 × 89 × 9 mm, with 4.0 mm walls
Custom outline traced from a shape

How to print it

Print flat in PETG; teeth along the bed lines.

Filament: at most about 22.6 g of PLA printed solid (roughly $0.45 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the siren Fin model?

The siren Fin model measures 100 × 89 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat in PETG; teeth along the bed lines.

How much filament does it use?

At most about 22.6 g of PLA (18.2 cm³ printed solid), roughly $0.45 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.