Wishlamp

Rest rings and a pendant in a lamp-shaped dish

A ring dish in the plan of a storyteller's oil lamp. Rings, studs and a watch rest in the oval body, a necklace pendant lies along the tapering spout and the curled handle sticks out at the back like the real thing. Engraved underneath: rub gently.

Customize this model

Size: 164 × 50 × 16 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 24.5 cm³
Est. weight (PLA): 30.4 g
Parts to print: 1
Category: Jewellery & grooming
Made by: Krypto
Built in: 10 steps

What’s in it

Custom outline, 164 × 50 × 16 mm, with 2.4 mm walls
Custom outline traced from a shape
Engraved text: “RUB GENTLY”

How to print it

Print in gold, bronze or silk PLA.

Prints as shown on its outline, no supports.

Filament: at most about 30.4 g of PLA printed solid (roughly $0.61 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the wishlamp model?

The wishlamp model measures 164 × 50 × 16 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in gold, bronze or silk PLA. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 30.4 g of PLA (24.5 cm³ printed solid), roughly $0.61 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.