Ringbearer

Present a ring inside a figure's lidded head

A small doll-like figure that carries the ring. Its egg-shaped body wears a heart on the chest, and its round head is a tiny lidded box: lift the topknot and the ring is inside. Made for proposals, ring exchanges and anniversaries; the base is engraved with the question.

Customize this model

Size (Base A): 56 × 48 × 44 mm
Shape: Egg-shaped
Walls: 2.0 mm
Volume: 42.0 cm³
Est. weight (PLA): 52.1 g
Parts to print: 2
Category: Jewellery & grooming
Made by: Krypto
Built in: 27 steps

What’s in it

Egg-shaped, 56 × 48 × 44 mm, with 2.0 mm walls
Engraved and raised text: “Label”, “WILL YOU?”
2 more bases built on (Bases B–C)
Base B: egg-shaped, 56 × 48 mm (stacked)
Base C: round, Ø 36 mm, 26 mm tall (stacked)

How to print it

Body and head in one print; lid separate. Add a felt disc inside.

Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.

Filament: at most about 52.1 g of PLA printed solid (roughly $1.04 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the ringbearer model?

The ringbearer model measures 56 × 48 × 44 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Body and head in one print; lid separate. Add a felt disc inside. Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.

How much filament does it use?

At most about 52.1 g of PLA (42.0 cm³ printed solid), roughly $1.04 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.