Trim an even beard neckline
Hold the curved guide under the jaw and run the trimmer along its edge: the neckline comes out as one clean, symmetrical curve, the same line every week instead of creeping higher each time.
Print flat in PETG.
Filament: at most about 10.0 g of PLA printed solid (roughly $0.20 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The beard neckline trimming guide model measures 150 × 64 × 7 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print flat in PETG.
At most about 10.0 g of PLA (8.1 cm³ printed solid), roughly $0.20 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the beard neckline trimming guide model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.