Molten Seal

Present a small gift in a wax-seal box

A trinket box in the shape of a wax seal. The 65 mm outline has molten lobes all round its edge, and the lid carries a big initial in relief like a seal stamp pressed into wax. Present cufflinks, earrings or a love note inside; print it deep red for the real thing.

Customize this model

Size: 65 × 63 × 24 mm
Shape: Custom outline
Walls: 2.0 mm
Volume: 35.0 cm³
Est. weight (PLA): 43.4 g
Parts to print: 2
Category: Jewellery & grooming
Made by: Krypto
Built in: 12 steps

What’s in it

Custom outline, 65 × 63 × 24 mm, with 2.0 mm walls
Custom outline traced from a shape
Raised text: “E”
Telescoping lid (prints separately)

How to print it

Deep red, gold or black silk PLA. Lid prints separately.

Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

Filament: at most about 43.4 g of PLA printed solid (roughly $0.87 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the molten Seal model?

The molten Seal model measures 65 × 63 × 24 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Deep red, gold or black silk PLA. Lid prints separately. Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 43.4 g of PLA (35.0 cm³ printed solid), roughly $0.87 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.