Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Blank round projecting sign with wall flange
By Krypto
Complexity
Medium
Desk & office Others Signs, tags & keychains
0
Blank round projecting sign with wall flange
MAIN PURPOSE: A customizable sign that sticks out from a wall or door frame, readable from the side
A blank round sign (120 mm) on a small square flange, so it sticks out from the wall like a shop sign and can be read from down the hall or along the aisle. Add your own words or icon on both faces in Text & Design. Mount the flange with double-sided tape, or screw it on through the two ready-made holes. Prints in one piece, no supports.
Printing notes
49.2 cm³
Volume
61.0 g
Est. weight
512
Triangles

Print it as it comes out: disc flat on the bed, flange standing up, no supports. Use 4 walls (perimeters) so the joint between disc and flange is solid. Screw it on through the two 4.5 mm holes with 4 mm wood screws, or stick the flange on with strong double-sided foam tape (VHB type).

AR view Customize
Preview of Living Stone
By Krypto
Complexity
Simple (set)
Others Signs, tags & keychains
0
Living Stone
MAIN PURPOSE: Stand a place card or photo in a stone fissure
A place card holder modelled on lithops, the living stones of southern Africa: two fleshy lobes split by a fissure where new leaves grow. The fissure is the slot, so each guest card appears to sprout from the stone, and the open lobes take a few pebbles for weight or a sugared almond for each guest.
Printing notes
18.8 cm³
Volume
23.3 g
Est. weight
1,332
Triangles

Matte PLA. Print a set. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Tidehalf
By Krypto
Complexity
Simple (set)
Others Signs, tags & keychains
0
Tidehalf
MAIN PURPOSE: Share a split keyring that locks into a disc
Two halves of one tide. A 46 mm disc is split by a wave, and both halves are the same shape turned round, so you print two, engrave a name on each and give one away. Clip them to two keyrings; when you meet, the waves lock back into a full circle.
Printing notes
3.3 cm³
Volume
4.0 g
Est. weight
1,576
Triangles

Print two in contrasting colours with different names. Prints flat as a plate, no supports.

AR view Open in app
Preview of Dit Dah
By Krypto
Complexity
Medium
Others Signs, tags & keychains
0
Dit Dah
MAIN PURPOSE: Carry a hidden word in Morse on your keys
A keyring that spells MUM in Morse code. The word is cut clean through a slim bar as dashes and dots (dash dash, dot dot dash, dash dash), so it looks like a graphic pattern to everyone else and reads as a message to the person carrying it.
Printing notes
5.4 cm³
Volume
6.7 g
Est. weight
3,810
Triangles

Print flat in any colour; hold it to the light.

AR view Open in app
Preview of Bridgelock
By Krypto
Complexity
Medium (set)
Others Signs, tags & keychains
0
Bridgelock
MAIN PURPOSE: Carry a love-lock keyring with initials
A padlock tag for the love lock you cannot leave on a bridge. The shackle is a real ring for your keys, the body carries two initials and a keyhole is cut right through. Print two and keep one each, or give one with a ring.
Printing notes
6.9 cm³
Volume
8.6 g
Est. weight
2,324
Triangles

Print flat in brass-coloured silk PLA.

AR view Open in app
Preview of Lever-handle tactile room tag
By Krypto
Complexity
Simple
Others Signs, tags & keychains
0
Lever-handle tactile room tag
MAIN PURPOSE: Mark rooms by touch at the door handle
Slips over a lever door handle, the one place every visitor's hand already goes: the room number stands 1.2 mm proud in large plain figures, readable by touch for blind and partially sighted visitors and by sight for everyone else, with no drilling into the door.
Printing notes
16.9 cm³
Volume
21.0 g
Est. weight
7,424
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Shut-off valve pipe tag
By Krypto
Complexity
Simple
Others Signs, tags & keychains
0
Shut-off valve pipe tag
MAIN PURPOSE: Label shut-off valves for emergencies
Snaps round a 15 mm pipe next to a stopcock or valve and names it: MAIN WATER, GAS, HEATING. In a leak or an emergency, whoever is at home finds the right valve at once instead of guessing among the pipes under the sink.
Printing notes
4.9 cm³
Volume
6.0 g
Est. weight
2,972
Triangles

Print in PETG in a bright colour. Prints flat as a plate, no supports.

AR view Open in app
Preview of Pencil-erasable key tag
By Krypto
Complexity
Simple
Others Signs, tags & keychains
0
Pencil-erasable key tag
MAIN PURPOSE: Label keys with a rewritable tag
A key tag with a recessed writing panel: write the door or locker in pencil, rub it out and reuse it when the key changes. The 2 mm rim keeps the panel off other keys and coins, so the writing survives a pocket.
Printing notes
2.8 cm³
Volume
3.5 g
Est. weight
1,160
Triangles

Print in matte PLA so pencil grips. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Tactile three-key sorter tag
By Krypto
Complexity
Medium
Others Signs, tags & keychains
0
Tactile three-key sorter tag
MAIN PURPOSE: Tell keys apart by touch
One tag carrying three small rings, each beside a different edge texture: notches, bumps or a smooth round end. Put the house, car and work key on their own rings and find the right one by touch in the dark or without looking, a help for everyone and essential for blind users.
Printing notes
4.4 cm³
Volume
5.4 g
Est. weight
888
Triangles

Add three small split rings. Prints flat as a plate, no supports.

AR view Open in app
Preview of Weekday slide-band reminder tag
By Krypto
Complexity
Medium
Others Signs, tags & keychains
0
Weekday slide-band reminder tag
MAIN PURPOSE: Show whether a daily chore is done
Seven day letters on a slim tag: roll a hair elastic along to today when the fish are fed, the plant watered or the bins put out, and anyone in the house can see whether it is done. The engraved letters let the band roll smoothly and the tag hangs from its hole.
Printing notes
7.3 cm³
Volume
9.0 g
Est. weight
6,948
Triangles

Add a hair elastic. Prints flat as a plate, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan