Bridgelock

Carry a love-lock keyring with initials

A padlock tag for the love lock you cannot leave on a bridge. The shackle is a real ring for your keys, the body carries two initials and a keyhole is cut right through. Print two and keep one each, or give one with a ring.

Customize this model

Size: 40 × 58 × 9 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 6.9 cm³
Est. weight (PLA): 8.6 g
Parts to print: 1
Category: Signs, tags & keychains
Made by: Krypto
Built in: 17 steps

What’s in it

Custom outline, 40 × 58 × 9 mm, with 4.0 mm walls
Custom outline traced from a shape
2 holes in the floor
Engraved text: “J + R”

How to print it

Print flat in brass-coloured silk PLA.

Filament: at most about 8.6 g of PLA printed solid (roughly $0.17 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the bridgelock model?

The bridgelock model measures 40 × 58 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat in brass-coloured silk PLA.

How much filament does it use?

At most about 8.6 g of PLA (6.9 cm³ printed solid), roughly $0.17 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.