Living Stone

Stand a place card or photo in a stone fissure

A place card holder modelled on lithops, the living stones of southern Africa: two fleshy lobes split by a fissure where new leaves grow. The fissure is the slot, so each guest card appears to sprout from the stone, and the open lobes take a few pebbles for weight or a sugared almond for each guest.

Customize this model

Size: 64 × 43 × 22 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 18.8 cm³
Est. weight (PLA): 23.3 g
Parts to print: 1
Category: Signs, tags & keychains
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 64 × 43 × 22 mm, with 3.0 mm walls
Custom outline traced from a shape

How to print it

Matte PLA. Print a set.

Prints as shown on its outline, no supports.

Filament: at most about 23.3 g of PLA printed solid (roughly $0.47 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the living Stone model?

The living Stone model measures 64 × 43 × 22 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Matte PLA. Print a set. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 23.3 g of PLA (18.8 cm³ printed solid), roughly $0.47 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.