Models Showcase: free 3D-printable organizers

By Krypto

Complexity

Simple (set)

Kitchen Kitchen organisers

0

MAIN PURPOSE: Double cupboard space at an adjustable width

A cupboard shelf riser that expands: two identical risers, one turned round, slide their three fingers between each other so the pair spans 390 to 460 mm, then sits at whatever width fits the cupboard. Tins go on top, plates or jars underneath.

Printing notes

246.1 cm³

Volume

305.2 g

Est. weight

1,240

Triangles

Print two, upside down (top on the bed). Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

AR view Open in app

By Krypto

Complexity

Advanced (set)

Others Travel & everyday carry

0

Inro Cell

MAIN PURPOSE: Carry small items in cord-locked stacked cells

One compartment of a printable inro, the stacked Japanese carry case: an oval-cornered box with a cord tube on each side. Stack as many cells as you need, each floor closing the one below, thread a cord through the tubes and slide a bead down to clamp the stack.

Printing notes

19.6 cm³

Volume

24.3 g

Est. weight

2,688

Triangles

Print several; 3 mm cord and a bead to clamp. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Advanced

Others Travel & everyday carry

0

Inro Cap

MAIN PURPOSE: Close and clamp a stack of carry cells

The top of an Inro stack: a flat plate with matching cord tubes and an engraved ginkgo crest. It closes the highest cell, the cords knot above it, and the sliding bead underneath the knot pulls every layer tight.

Printing notes

21.3 cm³

Volume

26.4 g

Est. weight

3,164

Triangles

Prints flat as a plate, no supports.

AR view Open in app

By Krypto

Complexity

Simple

Others Collections & display

0

Terrace Step

MAIN PURPOSE: Build locked stepped tiers for a collection

A display riser that links: hollow 120 x 60 mm steps with a dovetail tab on one end and a socket on the other drop into each other in a row. Print them at 20, 40 and 60 mm and arrange stepped tiers for figures, perfume or a collection, locked so nothing shifts.

Printing notes

52.9 cm³

Volume

65.5 g

Est. weight

996

Triangles

Print top down. Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

AR view Open in app

By Krypto

Complexity

Simple

Others Collections & display

0

Terrace Corner

MAIN PURPOSE: Turn a row of display risers round a corner

The turning piece of the Terrace system: a quarter-round riser with a dovetail tab on one straight edge and a socket on the other, so a row of steps can turn 90 degrees round a shelf corner or wrap into a curved amphitheatre.

Printing notes

29.9 cm³

Volume

37.0 g

Est. weight

1,072

Triangles

Print top down. Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

AR view Open in app

By Krypto

Complexity

Simple

Bedroom & bathroom Makeup & beauty

0

Terrace Well

MAIN PURPOSE: Add an open tray to a linked riser display

An open member of the Terrace system: the step outline printed the right way up as a 30 mm tray, so a row of risers can include a well for rings, lip balms or a candle dish. It locks to the steps on either side with the same dovetails.

Printing notes

43.4 cm³

Volume

53.8 g

Est. weight

996

Triangles

Print upright, open side up. Prints as shown on its outline, no supports.

AR view Open in app

By Krypto

Complexity

Simple (set)

Desk & office Desk organisation

0

Carriage Track

MAIN PURPOSE: Hold sliding desk modules in a captive rail

A desk rail that carriages ride in: a 240 mm channel open at both ends with an inward ledge along each long wall. Carriage pieces slide in from an end with their flanges under the ledges, so they glide along to wherever you want them but cannot tip out or be knocked off.

Printing notes

56.0 cm³

Volume

69.5 g

Est. weight

120

Triangles

Print two and butt them end to end for a longer run. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Advanced

Desk & office Desk organisation

0

Carriage Quiver

MAIN PURPOSE: Slide a pen cup along a desk rail

A tall pen cup that rides in the Carriage Track: low flanges at the foot slide under the track ledges, so the cup glides along the rail and stays upright even when pens are snatched out in a hurry.

Printing notes

9.7 cm³

Volume

12.0 g

Est. weight

324

Triangles

Print upright. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Advanced

Desk & office Desk organisation

0

Carriage Deck

MAIN PURPOSE: Slide a phone slot and tray along a desk rail

A wide carriage for the Carriage Track: a front bay for earbuds or cards and a 14 mm rear slot that stands a phone upright, riding on flanges under the track ledges. Slide it to whichever end of the desk you are working at.

Printing notes

23.3 cm³

Volume

28.8 g

Est. weight

336

Triangles

Print upright. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Others Home hardware & architecture

0

Tessera Mail

MAIN PURPOSE: Sort incoming post on a modular wall tile

A 100 mm square wall tile that sorts the post: a 30 mm deep pocket open at the top, with a window in its face so you can see at a glance that something has arrived. Tessera tiles share one grid, so letter pockets, hooks and frames build an entryway wall in any arrangement on a 100 mm screw pitch.

Printing notes

31.8 cm³

Volume

39.5 g

Est. weight

1,652

Triangles

Print floor down; the floor becomes the back. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app