Terrace Well

Add an open tray to a linked riser display

An open member of the Terrace system: the step outline printed the right way up as a 30 mm tray, so a row of risers can include a well for rings, lip balms or a candle dish. It locks to the steps on either side with the same dovetails.

Customize this model

Size: 130 × 60 × 30 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 43.4 cm³
Est. weight (PLA): 53.8 g
Parts to print: 1
Category: Makeup & beauty
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 130 × 60 × 30 mm, with 2.4 mm walls
Custom outline traced from a shape

How to print it

Print upright, open side up.

Prints as shown on its outline, no supports.

Filament: at most about 53.8 g of PLA printed solid (roughly $1.08 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the terrace Well model?

The terrace Well model measures 130 × 60 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright, open side up. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 53.8 g of PLA (43.4 cm³ printed solid), roughly $1.08 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.