Pocket Moon

Carry a mirror safely in a screw-lid compact

A round compact mirror case with a moon-and-star lid. Glue a 50 mm craft mirror into the base, screw the lid on and it rides safely in a handbag; the lid carries a name in relief and a star beside it. A personal gift that costs very little to make beautifully.

Customize this model

Size: Ø 64 mm, 10 mm tall
Shape: Round
Walls: 2.0 mm
Volume: 28.6 cm³
Est. weight (PLA): 35.5 g
Parts to print: 3
Category: Makeup & beauty
Made by: Krypto
Built in: 17 steps

What’s in it

Round, Ø 64 mm, 10 mm tall, with 2.0 mm walls
Raised text: “ISLA”, “Label”
Screw-on lid (prints separately)

How to print it

Silk PLA; glue in a 50 mm round mirror with a dot of silicone.

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 35.5 g of PLA printed solid (roughly $0.71 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pocket Moon model?

The pocket Moon model measures Ø 64 mm, 10 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Silk PLA; glue in a 50 mm round mirror with a dot of silicone. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 35.5 g of PLA (28.6 cm³ printed solid), roughly $0.71 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.