AR view

Tessera Mail

Sort incoming post on a modular wall tile

A 100 mm square wall tile that sorts the post: a 30 mm deep pocket open at the top, with a window in its face so you can see at a glance that something has arrived. Tessera tiles share one grid, so letter pockets, hooks and frames build an entryway wall in any arrangement on a 100 mm screw pitch.

Customize this model

Size (Base A): 100 × 100 × 30 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 31.8 cm³
Est. weight (PLA): 39.5 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 22 steps

What’s in it

Rectangular, 100 × 100 × 30 mm, with 2.4 mm walls
1 hole in the floor
One more base built on (Base B)
Base B: rectangular, 100 × 100 mm (stacked)

How to print it

Print floor down; the floor becomes the back.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 39.5 g of PLA printed solid (roughly $0.79 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the Tessera Mail model?

The Tessera Mail model measures 100 × 100 × 30 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print floor down; the floor becomes the back. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 39.5 g of PLA (31.8 cm³ printed solid), roughly $0.79 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.