AR view

Tessera Hook

Hang bags and coats on a modular wall

The hook tile of the Tessera wall: a 100 mm plate with a solid 16 mm peg and a 24 mm cap that stops straps sliding off. Hangs on two keyholes on the same 100 mm grid, so a bag hook can sit beside a pocket or above a frame.

Customize this model

Size (Base A): 100 × 100 × 9 mm
Shape: Rectangular
Walls: 4.0 mm
Volume: 54.1 cm³
Est. weight (PLA): 67.1 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 29 steps

What’s in it

Rectangular, 100 × 100 × 9 mm, with 4.0 mm walls
2 more bases built on (Bases B–C)
Base B: round, Ø 16 mm, 45 mm tall (stacked)
Base C: round, Ø 24 mm, 6 mm tall (stacked)

How to print it

Print flat; the peg prints upright, a touch of support under the cap.

Stacked parts are fused into one print.

Filament: at most about 67.1 g of PLA printed solid (roughly $1.34 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the Tessera Hook model?

The Tessera Hook model measures 100 × 100 × 9 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat; the peg prints upright, a touch of support under the cap. Stacked parts are fused into one print.

How much filament does it use?

At most about 67.1 g of PLA (54.1 cm³ printed solid), roughly $1.34 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.