Hang coiled cables and hoses
Coils an extension cable, a garden hose or a car charging cable on the wall: screw the plate up and loop the coil over the two long pegs. Print it lying flat.
PETG with 4 walls; screw into a stud or masonry plugs.
Prints flat as a plate, no supports.
Filament: at most about 195 g of PLA printed solid (roughly $3.90 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The cable and hose hanger model measures 200 × 70 × 11 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.
No. PETG with 4 walls; screw into a stud or masonry plugs. Prints flat as a plate, no supports.
At most about 195 g of PLA (157 cm³ printed solid), roughly $3.90 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the cable and hose hanger model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.