Terrace Step

Build locked stepped tiers for a collection

A display riser that links: hollow 120 x 60 mm steps with a dovetail tab on one end and a socket on the other drop into each other in a row. Print them at 20, 40 and 60 mm and arrange stepped tiers for figures, perfume or a collection, locked so nothing shifts.

Customize this model

Size: 130 × 60 × 40 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 52.9 cm³
Est. weight (PLA): 65.5 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 130 × 60 × 40 mm, with 2.4 mm walls
Custom outline traced from a shape

How to print it

Print top down. Print it as shown, then turn it over so the floor becomes the top.

Print floor-down as shown, then turn it over to use it.

Filament: at most about 65.5 g of PLA printed solid (roughly $1.31 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the terrace Step model?

The terrace Step model measures 130 × 60 × 40 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print top down. Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

How much filament does it use?

At most about 65.5 g of PLA (52.9 cm³ printed solid), roughly $1.31 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.