Backlit sea-glass light tray — 3D-printable model preview

AR view

Collections & display Simple

Backlit sea-glass light tray

Display translucent finds lit from below

An LED strip on the floor and a sheet of opal acrylic on the ledge above it: lay out sea glass, agate slices or amber and they glow from inside like stained glass, which shows colours and inclusions no shelf light can. The side hole takes the strip's cable.

Customize this model

Size: 160 × 110 × 30 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 42.6 cm³
Est. weight (PLA): 52.8 g
Parts to print: 1
Category: Collections & display
Made by: Krypto
Built in: 26 steps

What’s in it

Rectangular, 160 × 110 × 30 mm, with 2.4 mm walls
1 hole in the walls

How to print it

Add an LED strip and a 154 x 104 x 3 mm opal acrylic sheet.

Prints as shown on its floor, no supports.

Filament: at most about 52.8 g of PLA printed solid (roughly $1.06 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the backlit sea-glass light tray model?

The backlit sea-glass light tray model measures 160 × 110 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Add an LED strip and a 154 x 104 x 3 mm opal acrylic sheet. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 52.8 g of PLA (42.6 cm³ printed solid), roughly $1.06 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More collections & display

Slide-in double-glass specimen frame

Display flat specimens visible from both sides

Simple

Fluorescent mineral viewing box

View fluorescent minerals in daylight

Multi-part assembly

Open-book conservation cradle wedges

Support old books open without straining the spine

Simple (set)

One-piece stamp tongs

Handle postage stamps without touching them

Simple

Upturned-glass display cloche base

Turn a drinking glass into a display dome

Simple

Castaway

Give a rolled letter in a bottle-shaped box

Multi-part assembly

Encore Plinth

Stand a concert ticket upright with the venue

Medium

Keyday

Hand over the keys to a new home in a box

Multi-part assembly

See all 71 in Collections & display

Make it fit your space

Change the size, walls, dividers, holes and labels of the backlit sea-glass light tray model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model