Inro Cell

Carry small items in cord-locked stacked cells

One compartment of a printable inro, the stacked Japanese carry case: an oval-cornered box with a cord tube on each side. Stack as many cells as you need, each floor closing the one below, thread a cord through the tubes and slide a bead down to clamp the stack.

Customize this model

Size (Base A): 90 × 50 × 40 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 19.6 cm³
Est. weight (PLA): 24.3 g
Parts to print: 1
Category: Travel & everyday carry
Made by: Krypto
Built in: 31 steps

What’s in it

Rectangular, 90 × 50 × 40 mm, with 2.4 mm walls
2 holes in the floor
2 more bases built on (Bases B–C)
Base B: round, Ø 14 mm, 40 mm tall (beside)
Base C: round, Ø 14 mm, 40 mm tall (beside)

How to print it

Print several; 3 mm cord and a bead to clamp.

Prints as shown on its floor, no supports.

Filament: at most about 24.3 g of PLA printed solid (roughly $0.49 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the inro Cell model?

The inro Cell model measures 90 × 50 × 40 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print several; 3 mm cord and a bead to clamp. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 24.3 g of PLA (19.6 cm³ printed solid), roughly $0.49 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.