Cuff Handle

Add a handle to a takeaway coffee cup

Slide the split ring up a paper takeaway cup until it wedges on the taper: the hot cup now has a proper handle, so you can carry it without a sleeve or burnt fingers, and it slips off and back into your bag when the cup goes in the recycling. Fits most 12 oz cups.

Customize this model

Size: 86 × 117 × 10 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 12.1 cm³
Est. weight (PLA): 15.0 g
Parts to print: 1
Category: Travel & everyday carry
Made by: Krypto
Built in: 5 steps

What’s in it

Custom outline, 86 × 117 × 10 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

PETG, printed flat.

Prints flat as a plate, no supports.

Filament: at most about 15.0 g of PLA printed solid (roughly $0.30 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the cuff Handle model?

The cuff Handle model measures 86 × 117 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG, printed flat. Prints flat as a plate, no supports.

How much filament does it use?

At most about 15.0 g of PLA (12.1 cm³ printed solid), roughly $0.30 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.