Twin Landing

Pack small valuables, then tray them out

Packs as one closed box for watch, rings, earbuds and cables; in the hotel room lift off the lid, set it down beside the base and you have two landing trays on the nightstand, one for what comes out of your pockets and one for what goes back in tomorrow.

Customize this model

Size: 130 × 90 × 30 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 91.5 cm³
Est. weight (PLA): 113 g
Parts to print: 2
Category: Travel & everyday carry
Made by: Krypto
Built in: 20 steps

What’s in it

Rectangular, 130 × 90 × 30 mm, with 2.0 mm walls
1 divider
Engraved text: “LANDING”
Telescoping lid (prints separately)

How to print it

PLA or PETG; line the trays with felt.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 113 g of PLA printed solid (roughly $2.27 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the twin Landing model?

The twin Landing model measures 130 × 90 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PLA or PETG; line the trays with felt. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 113 g of PLA (91.5 cm³ printed solid), roughly $2.27 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.