Interleaf Riser — 3D-printable model preview

AR view

Kitchen organisers Simple (set)

Interleaf Riser

Double cupboard space at an adjustable width

A cupboard shelf riser that expands: two identical risers, one turned round, slide their three fingers between each other so the pair spans 390 to 460 mm, then sits at whatever width fits the cupboard. Tins go on top, plates or jars underneath.

Customize this model

Size: 239 × 90 × 70 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 246 cm³
Est. weight (PLA): 305 g
Parts to print: 1
Category: Kitchen organisers
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 239 × 90 × 70 mm, with 3.0 mm walls
Custom outline traced from a shape

How to print it

Print two, upside down (top on the bed). Print it as shown, then turn it over so the floor becomes the top.

Print floor-down as shown, then turn it over to use it.

Filament: at most about 305 g of PLA printed solid (roughly $6.10 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the interleaf Riser model?

The interleaf Riser model measures 239 × 90 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print two, upside down (top on the bed). Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

How much filament does it use?

At most about 305 g of PLA (246 cm³ printed solid), roughly $6.10 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More kitchen organisers

Shukhov Base

Build a hyperboloid crock from straight skewers

Simple

Shukhov Collar

Twist straight skewers into a hyperboloid waist

Simple

Drawer-front peelings bag hook

Hang a scraps bag under the chopping board

Simple (set)

Mixing bowl tilt ring

Hold a mixing bowl steady at an angle

Simple

Flour canister levelling bar

Level measuring scoops over the canister

Simple

Towel Shackle

Keep a tea towel on the oven door

Simple

Grip Chevron

Wedge and twist open tight jars

Medium

Tasting-spoon station

Keep clean and used tasting spoons apart at the pass

Simple

See all 76 in Kitchen organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the interleaf Riser model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model